Edit these specs to order a different model. Not all combinations are
valid. Options compatible with previous selections will be in bold.
FLUIDWELL B-CONNECTED | Basic - Flow rate Indicator / Totalizer | with Modbus communication and isolated outputs
Brand :
Stock Status :
Contact us for delivery
Brand :
Stock Status :
Out of Stock
Part Number : B-CONNECTED
The B-Connected is a specific flow transmitter designed to be connected to an automation network or PLC due to its Modbus communication and segregated analog and pulse output signals. Flow rate, total, and cumulative total are displayed on the display. The cumulative total is retransmitted via the scaled pulse output. The flow rate is retransmitted via the analog output. From a wide assortment, on-screen engineering units are simple to configure.
Specification
Features
Catalog
Specifications
Details
Input
Signal Inputs Flowmeter Inputs Basic types of flowmeter signals: Namur, Reed-switch, NPN, PNP and Sine wave (coil).
Power Supply
A single 3,6V lithium AA battery. 10 – 30V DC. Sensor Supply : 8.2V DC.
small-scale layout.
shows the total, accumulated total, and flow rate in real time.
separate outputs for pulses and analogs.
RS485 Modbus communication.
Sturdy IP65 (Type 4X) enclosure for a field, wall, or meter.
Cable entry with one 20 mm (0.79") and two 16 mm (0.63") knock-out holes.
"Know one, know them all" hierarchy of configurations.
Simple programming and reading with a readable alphanumeric display.
Clearly visible 7mm (0.3") alphanumeric and 12mm (0.5") numeric digits.
LED backlight that is bright.
Run totals and settings are automatically backed up.
A 10–30V DC power source and a lithium AA battery.
Part Number : F010 FLUIDWELL F010 Intrinsically safe - Flow rate Indicator | Input Signal (0)4 – 20mA | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Part Number : F011 FLUIDWELL F011 Intrinsically safe - Totalizer | with resettable total and non-resettable accumulated total | Temperatures between -40°C up to +80°C (-40°F up to 176°F).