Edit these specs to order a different model. Not all combinations are
valid. Options compatible with previous selections will be in bold.
FLUIDWELL E018 Explosion proof - Flow rate Monitor / Totalizer | with linearization, high / low alarms | analog and pulse signal outputs and HART Communication
Brand :
Stock Status :
Contact us for delivery
Brand :
Stock Status :
Out of Stock
Part Number : E018
One of the best models in our line of explosion-proof flow computers is the E018. You may easily communicate with intelligent "DD enabled host" systems by using the HART communication protocol. It is possible to enter 16 linearization points in addition to the average K-Factor. The device will significantly improve accuracy in any flow range by interpolating between these spots. Additionally, a capability for continuous flow rate monitoring with four alarm outputs and high and low flow rate alarm values is included. The European design that prioritizes efficiency above aesthetics and excellent craftsmanship set the E-series apart.
Specification
Features
Catalog
Specifications
Details
Input
Flowmeter Inputs Pulse type inputs: Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal. Status Inputs Remote control: external input for clearing total or to disable manual clearing by the keypad.
Power Supply
Long life Lithium battery. 4 – 20mA. Output loop-powered. 9 – 27V DC. Sensor Supply 3, 8.2, 12, 24V DC.
In accordance with ATEX, IECEx, FM, and CSA C-US, explosion proof.
Ex terior enclosure made of premium stainless steel or aluminum.
Plug and play connectors and a roomy chamber make installation simple.
Installing a direct flowmeter mounting nozzle with a 1" NPT thread is simple and saves money.
A flow rate-indicating speedometer, measurement units, total, accumulated total, alarm values, and alarm messages are all displayed on the display, providing important information at a glance.
Monitoring of alarms for high and low flow rates.
The flow curve was linearized to 15 points using interpolation.
11-digit cumulative total and 7-digit flow rate/total.
Clear backlight with LED flashing in the event of an alert.
Run totals and settings are automatically backed up.
Part Number : F010 FLUIDWELL F010 Intrinsically safe - Flow rate Indicator | Input Signal (0)4 – 20mA | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Part Number : F011 FLUIDWELL F011 Intrinsically safe - Totalizer | with resettable total and non-resettable accumulated total | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Out of Stock
E018-DATA-EN-V2310.pdf 
