Edit these specs to order a different model. Not all combinations are
valid. Options compatible with previous selections will be in bold.
FLUIDWELL F126-EG | Intrinsically safe - Flow Computer for gas | with temperature and pressure compensation for corrected volume | Ambient temperature: -40°C to +80°C (-40°F to 176°F).
Brand :
Stock Status :
Contact us for delivery
Brand :
Stock Status :
Out of Stock
Part Number : F126-EG
The F126-EG flow computer was designed to compute corrected gas volume under typical circumstances. By measuring the uncorrected volumetric flow, actual line temperature, and pressure—all of which are processed using equations kept in the flow computer—one can determine the corrected volumetric flow. One can adjust a compressibility factor to approximate the behavior of a real gas. It is possible to define the reference conditions as desired (e.g., 1.013 bar and 15°C or 60°F).
The display indicates the real line temperature and pressure in addition to the corrected flow rate, total, and accumulated total. Nm³ and other on-screen engineering units are readily configurable from a wide range of options.
Specification
Features
Catalog
Specifications
Details
Input
Flowmeter Inputs Pulse type inputs: Reed-switch, open collector, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal. Temperature Inputs PT100 - 2 or 3 wire PRTD sensor. Pressure Inputs (0)4 – 20mA.
computes the total, accumulated total, and adjusted flow rate.
shows the temperature and line pressure as it is.
An analog signal that is output that shows the flow rate correction.
simultaneously shows the total, the flow rate, and any additional accumulated total.
Counting in seven 8mm (0.31") increments.
Total: seven resettable digits measuring 17 mm (0.67").
Total accumulated: eleven 8mm (0.31") non-resetable digits.
Six 17mm (0.67"). temperature digits.
Six 17mm (0.67") digits of pressure.
On the display are engineering units for temperature, pressure, flow rate, and total.
LED backlighting.
intrinsic safety as defined by IECEx and ATEX.
Enclosures made of GRP, aluminum, or premium stainless steel.
EEPROM memory is used for automatic setting and running total backups.
From -40°C to +80°C (40°F to 176°F) is the ambient temperature.
Part Number : F010 FLUIDWELL F010 Intrinsically safe - Flow rate Indicator | Input Signal (0)4 – 20mA | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Part Number : F011 FLUIDWELL F011 Intrinsically safe - Totalizer | with resettable total and non-resettable accumulated total | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Out of Stock
F126EG-DATA-EN-V2214.pdf 
