Edit these specs to order a different model. Not all combinations are
valid. Options compatible with previous selections will be in bold.
FLUIDEWELL E126-EG | Explosion proof - Multi-Purpose Indicator | with temperature and pressure compensation for corrected volume | Ambient temperature aluminum enclosure: -40°C to +70°C (-40°F to 158°F).
Brand :
Stock Status :
Contact us for delivery
Brand :
Stock Status :
Out of Stock
Part Number : E126-EG
Using an ideal gas formula, the E126-EG monitors the actual flow, temperature, and pressure and converts it to gas volume at reference conditions, such as 0°C/1.013Bar or 14.7 PSI/60°F. It is possible to adjust the reference conditions in the settings. One can adjust a compressibility factor to approximate the behavior of a real gas.
The sturdy E126-EG was made with your safety in mind. Because the environment is frequently far harsher than what is required for explosion proof criteria, it goes beyond just following the guidelines for hazardous area approvals. Are you having problems with your procedures because of rain, snow, sea salt (offshore), or premature wear? The E126 withstands the toughest environments and provides precise measurement.
Specification
Features
Catalog
Specifications
Details
Input
Flowmeter Inputs Pulse type inputs: Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal. Temperature Inputs PT100 - 2, 3 or 4 wire PRTD sensor. (0)4 – 20mA. Pressure Inputs (0)4 – 20mA.
Power Supply
Long life Lithium battery. 4 – 20mA. Output loop-powered. 9 – 27V DC. Sensor Supply 3, 8.2, 12, 24V DC.
In accordance with ATEX, IECEx, FM, and CSA C-US, explosion proof.
Ex terior enclosure made of premium stainless steel or aluminum.
Plug and play connectors and a roomy chamber make installation simple.
Installing a direct flowmeter mounting nozzle with a 1" NPT thread is simple and saves money.
The display provides important details in a look, including temperature, pressure, measuring units, flow rate, total, accumulated total, and a flow rate-indicating speedometer.
Simple engineering unit setup with K-factor for mass or volumetric measurements. Use this interactive tutorial to learn more.
11-digit cumulative total and 7-digit flow rate/total.
LED backlight that is bright.
The total for the current day (Daily total), the total for the previous day (both non-resettable), and the total for the last 15 days can be shown.
FLUIDWELL F010 Intrinsically safe - Flow rate Indicator | Input Signal (0)4 – 20mA | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Part Number : F010
Part Number : F010 FLUIDWELL F010 Intrinsically safe - Flow rate Indicator | Input Signal (0)4 – 20mA | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
FLUIDWELL F011 Intrinsically safe - Totalizer | with resettable total and non-resettable accumulated total | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Part Number : F011
Part Number : F011 FLUIDWELL F011 Intrinsically safe - Totalizer | with resettable total and non-resettable accumulated total | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
FLUIDWELL F012 Intrinsically safe - Flow rate Indicator / Totalizer | Displays flow rate and total simultaneously | Input Signal (0)4 – 20mA | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Part Number : F012
FLUIDWELL D010 DIN Panel mount - Flow rate Indicator | Input Signal (0)4 – 20mA | Ambient temperature -40°C up to +80°C (-40°F up to 176°F).
Part Number : D010
FLUIDWELL D011 DIN Panel mount - Totalizer | with resettable total and non-resettable accumulated total | Ambient temperature: -40°C to +80°C (-40°F to 176°F).
Part Number : D011
FLUIDWELL D012 DIN Panel mount - Flow rate Indicator / Totalizer | Displays flow rate and total simultaneously | Ambient temperature -40°C up to +80°C (-40°F up to 176°F).
Part Number : D012
FLUIDWELL B - Basic Flow rate Indicator / Totalizer
Part Number : B-Basic
FLUIDWELL F014 Intrinsically safe - Flow rate Indicator / Totalizer | Input (0)4 – 20mA | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Part Number : F014
FLUIDWELL F110 Intrinsically safe - Flow rate Indicator / Totalizer | with Modbus communication | Analog and pulse outputs | Input (0)4 – 20mA.
Part Number : F110
FLUIDLINE F111 Intrinsically safe - Dual input Flow rate Indicator / Totalizer | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Part Number : F111
FLUIDWELL F115 Intrinsically safe - Bi-directional Flow rate Indicator / Totalizer | with analog, pulse signal and flow direction outputs
Part Number : F115
FLUIDWELL D014 DIN Panel mount - Flow rate Indicator / Totalizer | with pulse signal output | Ambient temperature -40°C up to +80°C (-40°F up to 176°F).
Part Number : D014
FLUIDWELL E110 Explosion proof - Flow Logger / Totalizer | with analog and pulse signal outputs
Part Number : E110
FLUIDWELL E115 Explosion proof - Bi-directional Flow rate Indicator / Totalizer | with analog, pulse and flow direction outputs
Part Number : E115
FLUIDWELL B-SMART | Basic - Flow rate Indicator / Totalizer | with pulse and analog output | Loop powered 4 - 20mA output
Out of Stock
E126EG-DATA-EN-V2310.pdf 
