Model Options

Name: Dwyer Instruments V6EPS-S-D-5-S | Mini-size flow switch | Stainless steel upper and lower body | 1-1/2 NPT | Stainless steel tee
Brand: Dwyer
SKU: V6EPS-S-D-5-S
Rating: 5 (1 reviews)

Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.

Upper Body

Weight 2 to 6 lb (.9 to 2.7 kg) depending on construction

Approvals ATEX, CE, CSA, IECEx, KTL, UL

Mounting Switch can be installed in any position but the actuation/deactuation flow rates in the charts are based on horizontal pipe runs and are nominal values

Connection

Enclosure Rating

Rating Electrical: UL models: 5 A @125/250 VAC. CSA, ATEX and IECEx models: 5 A @ 125/250 VAC (V~)
5A res., 3 A ind. @ 30 VDC (V ). MV option: .1 A @ 125 VAC (V~). MT option: 5 A @125/250 VAC (V~). [MT option not UL, CSA, ATEX or IECEx]

Maximum Operating Pressure Brass lower body with no tee models 1000 psig (69 bar), 303 SS lower body with no tee models 2000 psig (138 bar). Brass tee models 250 psi (17.2 bar), iron tee models 1000 psi (69 bar), forged and stainless steel tee models 2000 psi (138 bar), low flow models 1450 psi (100 bar)

Maximum operating temperature -4 to 220°F (-20 to 105°C) Standard, MT high temperature option 400°F (205°C) (MT not UL, CSA, ATEX, IECEx or KC) ATEX Compliant AT, IECEx IEC Option and KC (KC Option), Ambient Temperature -4 to 167°F (-20 to 75°C) Process Temperature: -4 to 220°F (-20 to 105°C)

Switch Type SPDT snap switch standard, DPDT snap switch optional

Set Point Adjustment: Standard V6 models none. Without tee models vane is trimmable. Low flow models are field adjustable in the range shown. See set point charts on Catalog page

Manufacturer Dwyer Instruments

Type Mini-size flow switch

Material Wetted: Standard V6 Models: Vane: 301 SS
Lower Body: brass or 303 SS
Magnet: ceramic
Other: 301, 302 SS
Tee: brass, iron, forged steel, or 304 SS.
V6 Low Flow Models: Lower body: brass or 303 SS
Tee: brass or 304 SS
Magnet: ceramic
O-ring: Buna-N standard, Fluoroelastomer optional
Other: 301, 302 SS

Dwyer Instruments V6EPS-S-D-5-S | Mini-size flow switch | Stainless steel upper and lower body | 1-1/2" NPT | Stainless steel tee

Brand :

Stock Status : Contact us for delivery

Brand :

Stock Status :

Out of Stock

Part Number : V6EPS-S-D-5-S

Surprisingly small in size, the Model V6EPS-S-D-5-S Flotect® Flow Switch is designed exclusively to monitor flows of liquid, gas, or air. This Series has been extensively tested in thousands of pipeline installations and processing plants worldwide. It is weatherproof, compliant with NEMA 4, and explosion-proof (specifications include a listing). Tees range in diameter from 1/2" to 2" (12.70 to 50.80 mm) and can be installed in pipelines. The unit may be readily adjusted to fit 1/4" and 3/8" (6.35 and 9.53 mm) pipework by simply adding bushings.

Specification
Features
Catalog

Specifications

Details

Manufacturer

Dwyer Instruments

Type

Mini-size flow switch

Material

Wetted: Standard V6 Models: Vane: 301 SS
Lower Body: brass or 303 SS
Magnet: ceramic
Other: 301, 302 SS
Tee: brass, iron, forged steel, or 304 SS.
V6 Low Flow Models: Lower body: brass or 303 SS
Tee: brass or 304 SS
Magnet: ceramic
O-ring: Buna-N standard, Fluoroelastomer optional
Other: 301, 302 SS

Maximum operating temperature

-4 to 220°F (-20 to 105°C) Standard, MT high temperature option 400°F (205°C) (MT not UL, CSA, ATEX, IECEx or KC) ATEX Compliant AT, IECEx IEC Option and KC (KC Option), Ambient Temperature -4 to 167°F (-20 to 75°C) Process Temperature: -4 to 220°F (-20 to 105°C)

Maximum Operating Pressure

Brass lower body with no tee models 1000 psig (69 bar), 303 SS lower body with no tee models 2000 psig (138 bar). Brass tee models 250 psi (17.2 bar), iron tee models 1000 psi (69 bar), forged and stainless steel tee models 2000 psi (138 bar), low flow models 1450 psi (100 bar)

Enclosure Rating

Weatherproof and Explosion-proof. Listed with UL and CSA for Class I, Groups A, B, C and D
Class II, Groups E, F, and G. (Group A on stainless steel body models only). ATEX CE 2813 II 2 G Ex db IIC T6 Gb Process Temp ≤75°C Alternate Temperature Class T5 Process Temp ≤90°C, 115°C (T4) Process Temp ≤105°C consult factory. EU-Type Certificate No.: KEMA 04ATEX2128. ATEX Standards: EN 60079-0:2012+A11:2013
EN 60079-1:2014.IECEx Certified: For Ex db IIC T6 Gb Process Temp≤75°C Alternate Temperature Class T5 Process Temp ≤90°C, 115°C (T4) Process Temp≤105°C consult factory. IECEx Certificate of Conformity: IECEx DEK 11.0039
IECEx Standards: IEC 60079-0:2011
IEC 60079-1:2014
Korean Certified (KC) for: Ex d IIC T6 Gb Process Temp ≤75°C
KTL Certificate Number: 12-KB4BO-0091

Rating

Electrical: UL models: 5 A @125/250 VAC. CSA, ATEX and IECEx models: 5 A @ 125/250 VAC (V~)
5A res., 3 A ind. @ 30 VDC (V ). MV option: .1 A @ 125 VAC (V~). MT option: 5 A @125/250 VAC (V~). [MT option not UL, CSA, ATEX or IECEx]

Connection

Electrical: UL models: 18 AWG, 18" (457.20 mm) long. ATEX/CSA / IECEx models: terminal block

Connection

Conduit: 3/4" (19.05 mm) male NPT standard, 3/4" (19.05 mm) female NPT or M25 with BSPT option on junction box models

Connection

Process: 1/2" (12.70 mm) male NPT or 1/2" (12.70 mm) male BSPT on models without a tee

Mounting

Switch can be installed in any position but the actuation/deactuation flow rates in the charts are based on horizontal pipe runs and are nominal values

Set Point

Adjustment: Standard V6 models none. Without tee models vane is trimmable. Low flow models are field adjustable in the range shown. See set point charts on Catalog page

Weight

2 to 6 lb (.9 to 2.7 kg) depending on construction

Approvals

ATEX, CE, CSA, IECEx, KTL, UL

Switch Type

SPDT snap switch standard, DPDT snap switch optional

Upper Body

Brass or 303 stainless steel