Edit these specs to order a different model. Not all combinations are
valid. Options compatible with previous selections will be in bold.
FLUIDWELL F016 Intrinsically safe - Flow rate Indicator / Totalizer | with linearization and pulse output | Ambient temperature: -40°C to +80°C (-40°F to 176°F).
Brand :
Stock Status :
Contact us for delivery
Brand :
Stock Status :
Out of Stock
Part Number : F016
The actual flow rate, total, and cumulative total are shown via the F016 local indicator/transmitter. Eight linearization points with their corresponding frequencies or values can be specified in addition to the average K-Factor or Span. Even for very low frequency applications, the device will interpolate between these locations, significantly improving accuracy in any flow range. Both the pulse output and the visible data are impacted by this linearization. From a wide assortment, on-screen engineering units are simple to configure.
Specification
Features
Catalog
Specifications
Details
Input
Signal Inputs Flowmeter Inputs Pulse type inputs: Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.
simultaneously shows the total, the flow rate, and any additional accumulated total.
Large digit selection available for total or flow rate.
Engineering units for flow rate that can be chosen on-screen include mL, L, m³, mg, g, kg, ton, GAL, bbl, lb, cf, REV, scf, Nm³, NL, P, or no unit at all. /sec, /min, /hour, or /day are the time units for flow rate.
Engineering units for the total that can be chosen on the screen include kg, lb, bbl, GAL, USGAL, ml, L, and m³.
The flow curve was linearized to eight points using interpolation.
Scaled pulse output with the sum accumulated reflected in it.
Seven 17mm (0.67") or 8mm (0.31") numbers indicate the flow rate.
Total: seven resettable digits measuring 17 mm (0.67").
Total accumulated: eleven 8mm (0.31") non-resetable digits.
Part Number : F010 FLUIDWELL F010 Intrinsically safe - Flow rate Indicator | Input Signal (0)4 – 20mA | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Part Number : F011 FLUIDWELL F011 Intrinsically safe - Totalizer | with resettable total and non-resettable accumulated total | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Out of Stock
F016-DATA-EN-V2343.pdf 
